When you test the serial ports and serial device, it is recommended that you do the following: Some serial devices work only if the COM port number is between a certain range. When you test your cables, it is recommended that you do the following: Make sure that the COM port number is the correct number for the serial device and that the software being used to connect the computer to the serial device uses the correct COM port number. Use a different serial cable, serial port, and serial device in your setup to see if the problem persists. In the list of extracted files, double-click the Setup. Windows XP comes with Hyper Terminal.
|Date Added:||8 February 2005|
|File Size:||55.41 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
If you look closely at the female end, the pins should be numbered. Close the window for the port that you just tested to speed up the testing of the remaining serial ports.
1360 – How do I install the Prolific PL203 or Airlink 101 USB to Serial driver?
See Proposition 65 Notice. Serial cables Serial ports Serial devices To test your setup components, try the following: Windows will typically save the files to the Downloads folder that is associated with your user segial for example, C: For products related to this article, click here.
You may block or delete all cookies from this site but parts of the site may not work. When the session is open, anything you type into it you should see. Test each cable individually. Once Windows has restarted, connect the USB serial adapter to your computer.
When you can see what you are typing, you know that the COM port is working and you can see which port number the physical serial port is. If the Run as Administrator option is not available, you might be attempting to run the installer from within the zipped file.
When you test the serial ports and serial device, it is recommended that you do the following: To determine the name of the chipset of your USB device, navigate to www. To install the driver: Windows XP comes with Hyper Terminal. When you test your cables, it is recommended that you do the following: Perform a serial loopback test.
Prior to jsb this device, ensure that your operating system is up to date for example, you have installed the most recent service pack.
Follow the on-screen prompts to install the device drivers and restart the computer when prompted. To check whether or not an RS serial port is working, perform an RS loopback test by doing the usn To check whether or not an RS serial port is working, perform an RS loopback test by doing the following:.
Click the Apple icon. Your USB device is listed according to the name of the chipset. Airlino101 loopback test fails when you cannot see what you are typing. Use the serial cable, serial port, and serial device in another setup to see if the problem is with the components or the setup. Extract the files using the instructions in Step 2.
Open a telnet session on the COM port number of airlnk101 device that you are testing. Under the appropriate heading, confirm that your USB device is listed and that there isn’t an error.
Use short cables when you are testing. Ideally, you should test a component that you know works in another setup. If the device is listed with an error, follow the instructions on the website to reinstall the drivers.
USB to RS DB9 Serial Adapter Cable | USB Serial Adapters |
Everything is hooked up but nothing is working. You can test to make sure that the following components are working correctly and are not the source of the issue: You can test to make sure that the following components are working correctly and are not the source of serjal issue:. How can I make sure my serial port is working in Windows?
Copy Link Was this information helpful?